Exhibitors

Kahe Glass to Glass Paraduş Hinge Paraduş hinge products used in shower cabins installed without using profiles on the wall sections when the bathroom walls and floor are flat; When there is curvature or disproportion on the wall or floor, shower cabins are installed using profiles on the wall sections. Glass door hinges used in square, oval, pentagonal and double-wall shower cabins have many features. Since it has aluminum magnets, it does not darken or turn yellow. It is resistant to corrosion and provides long-term use. Glass door width should be maximum 800 mm. It can be easily used on tempered glass with a thickness starting from 6 mm and 8 mm, 10 mm and finally 12 mm. It can be opened to the inside and outside at 90-degree, 135-degree and 180-degree angles. The total lifting weight of two hinges is 45 kg. The door tends to close automatically after 25 degrees. In order to prevent the glass from shaking, its installation, which includes a tension rod between the wall and the glass, must be done by experts in the field. It can be installed on the right side or on the left side if desired. How Long is the Warranty Period of Kahe Glass to Glass Paraduş Hinge? Paraduş hinge products, which have color options such as bright chrome, brass, satin, matte and gold and provide an aesthetic appearance in the areas where they are used, are offered for sale with a 2-year warranty. Hinge products, which are preferred in glass shower cabins, glass display cabinets, interior and exterior doors, offices, and especially glass doors used in shopping stores, are ideal with their flawless appearance

Glass Door Motors Glass door applications, which are increasingly used in new generation architecture, also increase the demand for different glass door accessories. Glass door motors are among the most important materials among glass door accessories. Hydraulic motors installed and hidden at the bottom of the glass doors allow the glass doors to close automatically. What are the Features of Glass Door Motors? Thanks to the door hydraulic adjustment, reliable entry and exit is provided in glass doors with the motor mechanism that ensures that the doors do not close too quickly and close automatically. It is applied to tempered glass doors with thickness starting from 6 mm and 8 mm to 10 mm and 12 mm. It provides 90 degree, 160 degree and 180 degree opening. The inner mechanism is steel and the outer surface is stainless. It has a mechanism to adjust both the brake and the speed. Door motors, which offer automatic closing feature to prevent the doors from slamming loudly and close slowly when closing, also provide protection against the danger of fingers or hands being trapped. How to Adjust Glass Door Hydraulics? Glass door hydraulics are adjusted by the locking mechanisms located on the top. The doors can be set to either stay fully open or half open. Thanks to the hydraulic press adjustment screw, the opening and closing speeds of the doors are adjusted. Glass door motors; It is frequently preferred in office doors, store doors, bank interior office doors and glass partition projects. How to Install Glass Door Hydraulics? Glass door motors are very easy to install and operate. The engine section is fixed to the ground with screws. The lower motor hinge of the glass door is placed on the pin located on the motor. The installation process is completed by placing a 6 mm, 8 mm, 10 mm or 12 mm tempered glass door of the specified dimensions through the channels of the lower motor hinge, and placing the glass door upper hinge on the upper part of the door.